Windows licence included · MT4, MT5 and cTrader VPS in London, New York, Frankfurt and Tokyo · Pay in BTC, USDT, USDC, ETH, SOL, LTC, XMR
Language: English
Configure a trading VPS

Guide · latency · checked 16 November 2026

How do I check ping to my broker from a VPS?

Last updated: · 4 min read

Quick answer

How do I check ping to my broker from a VPS?

Here is how to check ping to your broker from a VPS: read the ping in the MT4 or MT5 status bar on the server, then confirm it by timing a TCP connection to the broker's server address in PowerShell. Plain ping often fails because brokers block ICMP. CandleVPS publishes no latency figure of its own in its 4 metros.

In brief
  • Measure from the VPS, never from home.
  • Terminal first: the status bar shows the connection figure.
  • TCP timer second: ICMP is often filtered.
  • Repeat at different hours before drawing a conclusion.

How do I check ping to my broker from a VPS, step by step?

  1. Sign in to the VPS

    Connect over Remote Desktop and open the terminal logged in to the live or demo account.

  2. Read the status bar

    Look at the connection indicator in the bottom-right corner of MT4 or MT5; MT5 shows the ping in milliseconds.

  3. Open the server list

    Click the connection indicator to list the broker's access servers with their ping, and pick the lowest.

  4. Find the server address

    Get the broker server's host name or IP from the broker's support pages or support desk.

  5. Time a TCP connection

    In PowerShell, run Measure-Command { Test-NetConnection <host> -Port 443 } and read the total milliseconds as an upper bound.

  6. Repeat and note

    Repeat at the opening of the session the strategy trades and note the lowest and typical values.

Which method measures broker ping best?

Methods to measure latency from a VPS to a broker server and their limits
MethodWhereLimit
Terminal status barMT4 / MT5, bottom-right cornerShows the terminal's own figure only
Server list pingClick the connection indicatorLists access servers the broker publishes
cTrader connection indicatorcTrader status barcTrader only
Test-Connection (ICMP)PowerShellFails when the broker blocks ICMP
TCP timer on port 443PowerShellIncludes PowerShell overhead: an upper bound

Why does ping fail to my broker when MT4 works?

Many brokers drop ICMP echo requests at their firewall. The terminal talks to the broker over TCP, usually on port 443, while the ping command uses ICMP. A "request timed out" from ping proves nothing about trading. Microsoft's documentation shows that Test-NetConnection with -Port reports TcpTestSucceeded but no round-trip time, which is why wrapping it in Measure-Command gives a usable upper bound.

Which ping is good enough for a forex VPS?

Single-digit milliseconds mean the VPS sits in the same metro as the broker. Tens of milliseconds usually mean a different city; well over 100 ms means another continent. If the figure is high, check where the broker server really is and read what latency a forex VPS can give. CandleVPS publishes no latency figure of its own until one has been measured from a delivered server, with the date and the method; the round trip to a broker depends on where that broker's trade server actually sits, which a name or a city alone does not prove.

Why measure from the VPS and not from home?

Orders leave from the VPS, so only that path counts. A home ping to a broker adds the home line and the trip across the internet; it says nothing about the server. Latency to a broker is measured from the server itself: the ping figure in the MetaTrader status bar or the cTrader connection indicator, or a TCP connection timer to the broker's server address. CandleVPS's check of 16 November 2026 covers 4 metros: London, New York, Frankfurt and Tokyo. If the broker sits in another city, choose the VPS again.

What if the ping changes during the day?

Small swings are normal; large ones need a note and a ticket. Network routes shift and busy hours add a little delay. Write down the time, the figure and the method. If the rise lasts, send the notes to support with the server name. Trading foreign exchange and CFDs on margin carries a high risk of losing money. A VPS keeps a terminal online; it does not make a strategy profitable, and CandleVPS gives no investment advice.

Verdict
  • That is how to check ping to your broker from a VPS: two readings that agree are worth more than one.
  • Read the terminal first, confirm with a TCP timer, and ignore failed ICMP pings.
  • Measure from the VPS, at the hours the strategy trades.

Checking broker ping: common questions

How do I check ping to my broker from a VPS in MT4?

Look at the connection indicator in the bottom-right corner and click it to see the server list with ping values.

Why does MT4 show a different ping from PowerShell?

The terminal measures its own connection; PowerShell adds start-up overhead to the timer.

Can CandleVPS tell me the ping to my broker?

No figure is promised. CandleVPS publishes no latency figure of its own until one has been measured from a delivered server, with the date and the method; the round trip to a broker depends on where that broker's trade server actually sits, which a name or a city alone does not prove.

Which port do MT4 and MT5 use?

Usually TCP 443; the broker's server entry decides.

Is a lower ping always better?

Lower helps fast strategies; it does not make a strategy profitable.

Sources (3)
  1. Test-NetConnection (NetTCPIP) learn.microsoft.com/en-us/powershell/module/nettcpip/test-netconnection — Microsoft Learn (read 2026-11-16)
  2. MetaTrader 5 Help: platform settings metatrader5.com/en/terminal/help/startworking/settings — MetaQuotes (read 2026-11-16)
  3. MQL5 VPS: plans, limits and free trial mql5.com/en/vps — MetaQuotes (MQL5.com) (read 2026-11-16)

Measure from a server in the broker's metro

London, New York, Frankfurt or Tokyo. Wick from $6.75 a month on 12 months.

From $6.75/mo on 12 months, licence included

Configure